Filter
Top Products
504/604
MANUAL
V2.2
OPTIONAL FUNCTIONALITIES > p. 52
If the TV programs from your personal calendar do not seem to be correctly cop-
ied to the ARCHOS scheduler, go to www.archos.com/rmware to make sure that
you have the latest rmware version (see Updating the Firmware).
If you change your Yahoo!
®
personal calendar by deleting some TV programs and
adding new ones, only the new programs will be added to the ARCHOS scheduler
when you save the html le to the ARCHOS device. If you want to delete sched-
uled items, you must do this in the ARCHOS scheduler itself.
Missed recordings (because you did not have the ARCHOS connected to the DVR
Station at the record time) will be deleted from the scheduler.
If a personal calendar recording event does not nd the station name in your list
of channels, it will put the event into the scheduler and mark it with a ?, indicat-
ing that you must assign a channel number to the name. Move the cursor to the
line containing the ? and select the “Set Channel” menu item. You can now scroll
through the channel numbers and assign a number to the station name for that
event. You only have to do this once. Your ARCHOS device will keep the station
name and its channel number.
THE INFRARED EMITTER
The DVR Station has a high-powered infrared LED at the front. It allows your
ARCHOS device to communicate with your tuner (VCR,
cable or satellite box), so that it can turn it on and off,
and change channels on it.
This is a one time step to set your ARCHOS device to
send the correct infrared codes to control your tuner. If
you do not plan on making scheduled recordings, then
you do not need to set the infrared emitter code.
Before beginning this procedure of setting the emit
-
ter code, your device must be connected to the DVR
Station, which must be powered with the charger/adapter.
The infrared control works through the reection of the infrared signal within a
room. In order to improve the re-
ception of this infrared signal on
your tuner (VCR, cable or satellite
box), you could rearrange the posi-
tion of the DVR Station and/or the
tuner such that there are more re-
ective surfaces (furniture, a wall,
etc. - see diagram). Good communi-
cation between the DVR Station and
your tuner also depends on the sen-
sitivity of your tuner’s IR receiver.
•
•
•
•
•
•
•
•