Filter
Top Products
8
2-1 Connecting the Power
Refer to Chapter 3 for instructions on how to install and use the battery pack.
1.Connect the power cord to the AC adapter.
2.Connect the power cord to a power source.
3.Connect the AC adapter to the DC IN jack on the left side of the player.
Use only the AC adapter that was shipped with the player. Using a substitute may
result in damage to the player. Do not use the adapter of other equipments.
It is normal for heat to release from the adapter when it is connected to a power source.
Please disconnect the adapter from the source when the player is not in use.
2-2 Opening the LCD screen
The LCD screen is embedded in the front cover.
To open the screen:
1.Press the cover lock at the top of the screen cover.
2.GENTLY lift the cover to the position.
DO NOT TOUCH THE SCREEN WITH SHARP OBJECTS ALWAYS CLOSE
THE COVER WHEN THE DVD PLAYER IS NOT IN USE.
2-3 Opening the Disc Cover
The disc cover inside the player protects the disc while it is being played.
It should be closed at all times except to change discs.
To open the disc cover, press the OPEN button on the left side of the cover.The cover
will be open.
Even though the laser beam will stop emitting when the cover is opened,
DO NOT LOOK AT THE LASER HEAD. The laser beam could still damage
your eyes.
CHAPTER 2.
QUICK USER GUIDE
CHAPTER 2. (QUICK USER GUIDE)