Amphion M510 Portable DVD Player User Manual


 
15
Playing back (continued)
DVD : Use or the number buttons to select which program you would like to view.
Then press ENTER to begin playback. Press TOP MENU or MENU to return to the menu screen.
After playing back a disc
Slide the ON/OFF switch toward "OFF" to turn the power off.
If stop mode or pause mode lasts for more than 5 minutes, the unit automatically enters standby mode (Auto
power saving). While the liquid crystal display is off, the power indicator remains lit. Press Play to turn on the
power again.
Video CD : Use the number buttons to select which sound track you would like to listen to.
Playback begins. Press MENU to return to the menu screen.
When PBC is set to ON, you cannot select the program with the main unit.
For either DVD or Video CDs, menu continuations and the exact operating procedures for using the
menu may vary from disc to disc. Follow the instructions on the menu screen.
To turn the power off
Slide the POWER switch on the main unit toward OFF, or press POWER on the remote control.
Removing the disc
Make sure that the disc stops and is completely still before you remove the disc.
If you touch the spinning disc, you may hurt your finger.
Caution
1.Press to stop playback.
2.Put your finger on the pit DISC OPEN on the left side of this unit and open the disc cover.
3.Remove the disc from the groove, Do not touch the surface of the disc.
4.Close the disc cover.
To listen through the headphones
Insert the headphones into the Phones Jack on the right side.
0-9, +10
PLAY
PLAY
Stopping playback
Press
This unit remembers the point at which
playback stopped (Resume function). When
(Play) is pressed, playback begins from
the resumed point.
Fast Forward, Rewind
Press or on the player.
Or, press or on the remote control.
The program is fast forwarding or reversing at
speed.high
SPEAK
Both and on the player have double
functions press slightly for fast forward
or fast rewind, Press 3-5 seconds for the
previous or the next program.