Filter
Top Products
14
CHAPTER 4.
PLAYBACK
CHAPTER 4. (PLAYBACK (THE BASICS))
Playing back
1.
.
Slide POWER switch on the main
unit toward ON to turn the power on
The power cannot be turned ON using the POWER
button on the remote control.
When using the battery pack, the power may
not be turned on at once. In this case, turn the
power on again after 3 seconds. If the unit is still
not turned on, recharge the battery pack.
2. Press OPEN to open the display
panel.
OPEN
3. Put your finger on the pit DISC
OPEN at the front side of this
unit and open the disc cover.
4. Load a disc with the label side up
and push down around the center
of it.
The disc is fixed with a click.
A disc with the label side up
5. Close the disc cover.
This unit automatically begins playing the disc.
NOTES
Load only one disc.
After loading or removing a disc, make sure to close the disc cover. If the inside of the unit be
comes dusty, it will cause a malfunction.
When playing a DVD disc, set the PAL/NTSC button on the remote control to suit the color
system of the disc playing during stop or power off. Otherwise, the full potential quality of the
disc may not be regenerated.
POWER ON/OFF
When the menu screen is displayed
The menu screen may be displayed first after loading a DVD or video CD version 2.0 with PBC ON
which contains a menu.
You cannot select the program in the menu screen while the on screen display appears.
Turn off the on screen display before selecting the program.
DISC OPEN
+
DC IN
ON/OFF