Altec Lansing iMT702 Portable Speaker User Manual


  Open as PDF
of 20
 
14
Troubleshooting
Symptom Possible Problem Solution
Speakersystemdoesn’t
respond(nopower)
ACadapterisn’tpluggedintoawalloutlet
or the connector isn’t plugged into the
power supply jack on the back of the
speaker system
PlugtheACadapterintoawalloutletandplugtheconnectorintothepower
supply jack on the back of the speaker system.
Wall outlet is not functioning Plug another device into the same outlet to confirm the outlet is working.
The rechargeable battery isn’t charged. Rechargethebattery.(SeetheGetting Startedsectionfordetails.)
The power isn’t turned on.
Turn on the speaker system by pressing the
button. The indicator light
turns on.
iPhone or iPod doesn’t dock
properly
Using the wrong adapter for iPhone or
iPod or no adapter
Make sure the adapter is the proper fit for your iPhone or iPod.
iPhone or iPod didn’t install properly RemoveyouriPhoneoriPodfromthedockandcheckforobstructiononthe
connectors in the dock and on your iPhone or iPod. Then reseat it in the dock.
iPhone or iPod doesn’t
respond to the speaker
system
iPhone or iPod is not installed properly RemoveyouriPhoneoriPodfromthedockandcheckforobstructionson
the connectors in the dock and on your iPod. Then reseat it in the dock.
Your iPhone or iPod software is too old
UpgradesoftwareonyouriPhoneoriPod.Fordetailsvisit
www.apple.com/ipod/download.
iPhone or iPod is locked up Please make sure your iPhone or iPod is working properly before docking into
the unit. Please refer to your iPhone or iPod manual for details.
Using1st-or2nd-generationiPod,iPod
shuffle or other devices
Your speaker system cannot control those iPods or other devices.
 previous next