Interfaces:
FireWire (IEEE 1394a) – 400 Mbps
USB 2.0 – up to 480 Mbps
Physical
Dimensions:
W 4.7" x H 1.85" x L 7.4"
Weight: ...........
450g
Electrical
Input DC voltage: ....
19~25V
Input current: ......... 4A max
Input power: ......... 75W max
Output voltage: ....... 12V +/- 5%
Output current: .... 5A average,
6A peak (10 sec)
Efficiency: .............
>90%
Environmental
Temperature:
- operating: ......+5 – +40 ºC;
- non-operating: .-40 – +70 ºC;
Humidity:
- operating : .....5 – 90 %
- non-operating: .5 – 95%
19
TECHNICAL SPECIFICATIONS
Supports up to 127 devices
Connecting more than one or two USB devices to a computer typi
-
cally requires the use of one or more hubs; each hub can accommo
-
date several USB devices.
Master-slave architecture
The computer (master) dictates data flow between attached devices
(slaves).
Cable length up to 5 m
On-bus power up to 2.5 W
Suitable for low-powered devices such as flash card readers.
Plug & Play
You do not need to assign unique ID numbers, or connect termina-
tors. On most operating system you do not need to install drivers.
Hot-swappable
Devices can be added and removed while the computer is running.
Also, you can turn off a device when not needed
.
Model #:
RPDOCKU2FA
18