Printer Power
The power supply in the printer automatically detects the applied line voltage and
works in the 90 to 265 VAC range.
WARNING!!! For personnel and equipment safety, always
use a three-prong plug with an earth ground connection.
NOTE: Depending on how your printer was ordered, a power cord
may or may not be included. If one is not included, or if the one
included is not suitable for your requirements, refer to “Power Line
Cord Specifications” on page 83.
Refer to Figure 1.
The AC power cord connector must be
plugged into the mating connector at the
rear of the printer.
Make sure that the POWER switch is in
the “off” position before connecting the
power cord to an electrical outlet.
Zebra Z4M Printer User’s Guide 3
Connector
AC
power
switch
Figure 1
