DocuColor 2060 NPS/IPS on a Novell network
D-10 Installation Planning Guide
– Define the printer in the Queue Service by highlighting the
printer name (for example, Gazette) and pressing Enter.
– Press the Insert key to select the Print Queue (for
example, Gazette) you want to bind with PServer (for
example, PGazette).
– Save the information.
• When configuring NPS/IPS, answer the configuration
questions as follows:
– Remote Printer for Novell Netware -- <N>
– Use Print Server for Novell Netware -- <Y>
– Name of Novell Print Server -- PGazette
– IPX Internal Network Number [000000##] (assigned by
network administrator)
– IPX number of Connected LAN [000000##] (assigned by
network administrator)
– Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
• After installation, change from PSERVER to RPRINTER as
follows:
– Sign on to privilege as an administrator.
–Type Configure to specify the printer configuration.
– Select Option 3, enter <N> to the Review All
Information question, and type Novell to review Novell
information.
– Remote Printer for Novell Netware -- <N>
– Use Print Server for Novell Netware -- <N>
– Name of Novell Print Server -- PGazette
– IPX Internal Network Number [000000##] (assigned by
network administrator)
– IPX number of Connected LAN [000000##] (assigned by
network administrator)
– Token Ring Framing type -- TOKENRING (or
TOKENRING_SNAP)
– Save all of the options.
•Type Start All.
• Reboot the NPS/IPS.
