18 Freedom SW Owner’s Guide
Operating the Freedom SW with the SCP
SCP Navigation
Startup Screen
This screen is shown when the Xanbus SCP first receives power from the
Xanbus network.
Viewing the SCP Home Screens
The top level screens on the Xanbus SCP are the startup screen, the
System Status screen (Figure 7) and the device Home screen. After power
is applied and the startup screen appears, the Xanbus SCP displays the
System Status screen. You can view the device Home screen for the
Freedom SW and other devices in the system by pressing the up and down
arrows.
System Status Screen The System Status screen appears after the
startup screen. It displays aggregated status information for the entire power
system. For example, a single system might have two Xanbus network-
connected Freedom SWs, one Xanbus AGS module, and one Xanbus SCP
all connected to a single battery bank.
The System Status screen always features a menu arrow pointing to the
Enter button. Pressing Enter takes you to the Select Device menu screen.
For more information, see “Reading the System Status Screen” on page 24.
Figure 6
Startup Screen
Xanbus System ControlPanel (SCP)
FGA:809-0921
ACIn/Charge
InverterOn
Low Battery
Fault
STBY/ON
FaultClea r
TM
Enter Func
Figure 7
System Status
IMPORTANT:
If you are uncertain which Xanbus SCP menu screen you
are viewing, you can return to the starting point—the System Status
screen—by pressing the Func button repeatedly until the screen stops
changing.
Xanbus System Control Panel (SCP)
FGA:809-0921
AC In/Charge
InverterOn
Low Battery
Fault
STBY/ON
FaultClea r
TM
Enter Func
System Status
Battery
BatLev
Load
AC In
12.1V -257A 84”F
Invert
120V 12A
0V 0A
menu EnInv EnChg Shr
menu arrow that points to the Enter
button. The menu arrow is called a
soft key. See “Soft Key Navigation”
on page 20 for more information.
Menu screen title. Every screen
has one.
Freedom SW 3K2K InvChg Owners Guide.book Page 18 Wednesday, October 9, 2013 1:34 PM
