4-50 PC Setupbb __________________________________________
9. Repeat steps 5 through 8 until the measurements in the
corresponding boxes are within .5 mm of each other.
Note: Your application printer properties must match your
calibration settings. For example, if you chose User-
defined 1 as your media type in the More X-ACT
calibration window for 11 x 17 (tabloid) paper, you
must choose User-defined 1 as your Media Weight in
your application printer properties when printing on 11
x 17 paper.
10. Click Close. The More X-ACT window closes.
Printer Margin Adjustment
Use Printer Margin Adjustment feature to adjust the printer margin,
which is the position of the imageable area on the media.
Note: Use the standard paper size (letter or A4) for your paper
cassette with the Align Paper function.
1. Open XANTÉ Command Center and select Controller: Align
Paper. The Align Paper window appears.
Fig. 4.31 Align Paper Window
