Xanté 3 Series Manual

A SERVICE OF

next previous

___________________________________________ PC Setup 4-39

e. Click Print Calibration Page (fig. 4.23). The calibration

page shows the printer’s performance using no gamma

curve correction (fig. 4.24).

Note: Print only one calibration page (using the Print

Calibration Page button) at the beginning of the

calibration process. Printing this page again later

in the process resets the calibration, cancelling

any linearization you have already done.

Fig. 4.24 Sample Calibration Page

Using the Densitometer

A densitometer uses a standard light source to measure the amount of

light reflected from printer output. This measurement is compared to

a standard and expressed as a percentage of gray.