A SERVICE OF

logo

– 18 –
Pilot Burner Adjustment
Turn the pilot burner B valve ON. The valve is located in the lower compartment.
Each burner is provided with a standing pilot burner. Adjust the pilot flame to approximately a
3
/4" (19 mm) flame length. The adjusting valve is installed in the inlet of the pilot burner manifold, located
behind the removable front panel above the grid area (Fig. 20).
PL-41733-1
PILOT BURNER ADJUSTMENT VALVE
HI-LOW VALVE
BURNER ORIFICE TIP
Fig. 20