A SERVICE OF

logo

USING THE CONTROL PANEL
2-16
The options are as follows:
Off
1 hour
15 minutes
2 hours
30 minutes
3 hours
The default value is 15 minutes.
Low Toner Selection
You use this selection to specify whether you want the printer to continue to print
after a low toner condition is detected. The options are as follows:
Continue - allows the printer to continue printing. Output becomes lighter
and may be unusable unless the toner cartridge is changed.
Stop - causes the printer to stop printing.
The default value is Continue.
Resolution Selection
You use this selection to set the printer resolution for PCL output. The options
are as follows:
300 dpi
600 dpi
When the PostScript
option is installed, you can set the printer resolution for
PostScript
output. The options are as follows:
300 dpi
400 dpi
600 dpi
The default value for both PCL and PostScript
is 600 dpi.