Chapter 1: Operation 3
The flow charts show the sequence of key presses and displays for the various
operating tasks. All key presses called for in the flow charts are momentary, unless
otherwise stated.
The type of data displayed (true or apparent) is indicated by a square marker on
the digital display adjacent to either the
TRUE or APP legend, as appropriate.
Note:
If boat speed information is not available on the SeaTalk bus when TRUE is select-
ed, the digital display shows a series of dashes and the pointer will continue to show the
apparent wind direction.
Beaufort wind
speed
(not available on
ST60 Close
Hauled Wind)
Maximum
wind
speed
Maximum
true wind
speed
alarm
Low true
wind
speed
alarm
High
apparent
wind
angle
alarm
Low apparent
wind angle
alarm
Wind speed
Press momentarily
Press
for 3s to reset
maximum wind speed
Using the disp key
disp
tack
1. Screens annotated with * show the
alarm thresholds and are not available
on the ST60 Close Hauled Wind instrument.
To set up the alarm thresholds, refer to
Setting alarm conditions
(in text).
Notes:
2. All screens except Wind Speed are
temporary and will time out to the Wind
Speed screen after 7 seconds.
LO
HI
LO
disp
disp
disp
disp
disp
disp
disp
D4315-1
KTS
KTS
KTS
KTS
