Command Line Interface (CLI) AP-700 User Guide
Parameter Tables
221
Examples:
show qosedcatbl (or qosqapedcatbl)
set qosedcatbl
(or qosqapedcatbl
) <Index>.<Access Category> <EDCA parameter> <value>
For example: set qosedcatbl 3.1 cwmin 15
Defining the QoS Policy used for a Wireless Interface SSID
The QoS Policy object configures the QoS policy to be used per wireless interface SSID. This object is part of the
Wireless Interface SSID Table; the CLI command for this table is “wifssidtbl.”
* A QoS Policy number needs to be specified in the SSID table. This depends on the QoS policies configured by the user. Once the user has
configured QoS policies, the user should specify the policy to be used for that SSID.
CWmax Integer 0 - 65535 RW cwmax
AIFSN Integer 2 - 15 RW aifsn
Tx OP Limit Integer 0 - 65535 RW txoplimit
MSDU Lifetime Integer 0 - 500 RW msdulifetime
AC Mandatory Truth Value true
false
RW acmandatory
Name Type Value Access CLI Parameter
QoS Policy Integer See Note* RW qospolicy
Name Type Value Access CLI Parameter
