124
ADJUSTMENTS
3 List of GET commands
What are GET commands?
¶ Commands which output adjustment data, etc. from MPJ microprocessor to the PC.
¶ The adjustment data is output for every mode.
Example 1) When <GGH> command is set when CONV.DATA MEMO-1 is selected, the GREEN horizon-
tal convergence data of MEMO-1 will be get. In the same way, when <GGH> command is set
when CONV.DATA MEMO 2 to 3 are selected, the GREEN horizontal convergence data of
MEMO-2 to 3 will be get.
Example 2) When <GWB> command is set when COLOR MODE =1 and at the same time, INPUT=RGB,
the W/B DATA for COLOR MODE=1 and INPUT=RGB will be get.
¶ Only valid for one ID. (Invalid for ID=**, 1*, *1, etc.)
¶ The adjustment data, etc. is output in ASCII codes.
(Note) < > indicates the command name.
[1] <GRH> (GET RH CONV.DATA) — RED horizontal convergence data is output.
<GGH> (GET GH CONV.DATA) — GREEN horizontal convergence data is output.
<GBH> (GET BH CONV.DATA) — BLUE horizontal convergence data is output.
Format : Output in the following order.
1 STX (02H)
2 <&30>/&H STATIC adjustment data (3 BYTE)
3 <&31>/&H SKEW adjustment data (3 BYTE)
4 <&32>/&H BOW adjustment data (3 BYTE)
5 <&36>/&H SIZE adjustment data (3 BYTE)
6 <&42>/&H LINEARITY adjustment data (3 BYTE)
7 <&37>/&H KEY adjustment data (3 BYTE)
8 <&43>/&H SUB KEY adjustment data (3 BYTE)
9 <&38>/&H PIN adjustment data (3 BYTE)
0 <&44>/&H SUB PIN adjustment data (3 BYTE)
- <&33>/&H 3D SKEW adjustment data (3 BYTE)
= <&34>/&H 4D BOW adjustment data (3 BYTE)
~ <&53>/&H 5D SKEW adjustment data (3 BYTE)
! <&59>/&H 6D BOW adjustment data (3 BYTE)
@ <&48>/&H MID SIZE adjustment data (3 BYTE)
# <&54>/&H MID LIN adjustment data (3 BYTE)
$ <&41>/&H 5D SIZE adjustment data (3 BYTE)
% <&47>/&H 6D LIN adjustment data (3 BYTE)
^ <&39>/&H 3D KEY adjustment data (3 BYTE)
& <&45>/&H 3D S-KEY adjustment data (3 BYTE)
* <&40>/&H 4D PIN adjustment data (3 BYTE)
( <&46>/&H 4D S-PIN adjustment data (3 BYTE)
) <&49>/&H MID KEY adjustment data (3 BYTE)
_ <&55>/&H MID S-KEY adjustment data (3 BYTE)
+ <&50>/&H MID PIN adjustment data (3 BYTE)
¡ <&56>/&H MID S-PIN adjustment data (3 BYTE)
™ <&51>/&H MID 3D KEY adjustment data (3 BYTE)
£ <&57>/&H MID 3D S-KEY adjustment data (3 BYTE)
¢ <&52>/&H MID 4D PIN adjustment data (3 BYTE)
∞ <&58>/&H MID 4D S-PIN adjustment data (3 BYTE)
§ ETX (03H)
(Note)
&
: R or G or B
