Controls and displays
02
15
en
10
///
(
TUNE
/
PRESET
) /
ENTER
Use the arrow buttons when setting up your HOME
MENU. Use TUNE / to find radio frequencies and use
PRESET / to find preset stations (page 52).
11
TUNER EDIT
Use with ////ENTER to memorize and name
stations for recall (page 52).
12
BAND
Switches between AM and FM radio bands (page 52).
13 Listening mode buttons
AUTO SURR/ALC/STREAM DIRECT –
Switches
between Auto Surround
(page 57)
, Auto level control,
Optimum Surround mode and Stream Direct mode
(page 60)
.
HOME THX – Press to select a Home THX listening
mode (page 58).
STANDARD SURROUND – Press for Standard
decoding and to switch between the various 2 Pro
Logic IIx and Neo:6 options (page 57).
ADVANCED SURROUND – Use to switch between
the various surround modes (page 59).
STEREO – Switches between stereo playback and
Front Stage Surround Advance modes (page 60).
14
MULTI-ZONE
controls
If you’ve made MULTI-ZONE connections (see MULTI-
ZONE setup on page 35) use these controls to contr ol the
sub zone from the main zone (see Using the MULTI-ZONE
controls on page 85).
15
SPEAKERS
Use to change the speaker system (page 84).
16
HOME MENU
Press to access the Home Menu (pages 42, 44, 80, 95,
104, 106, 108 and 112).
17
RETURN
Press to confirm and exit the current menu screen.
18 HDMI input connector
Use for connection to compatible HDMI device (Video
camera, etc.). See Connecting an HDMI-equipped
component to the front panel input on page 39.
19
iPod/iPhone/USB
terminals
Use to connect your Apple iPod as an audio and video
source, or connect a USB device for audio and photo
playback (page 40).
20
MCACC SETUP MIC
jack
Use to connect the supplied microphone (page 42).
21
PHONES
jack
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
Display
1
SIGNAL
indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 63).
2 Program format indicators
Light to indicate the channels being input when PCM
signals are being input. They do not indicate the audio
signals being output from the receiver.
L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( )) indicators light
when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above, the mono
surround channel or matrix encode flag
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected.
4
S.RTRV
Lights when the Sound Retriever function is
active
(page 82)
.
PCM
HDMI
DIGITAL
ANALOG
L C R
SL SR
XL XR
XC
LFE
AUTO
DIGITAL PLUS
AUTO SURROUND
STREAM DIRECT
PROLOGIC
x
Neo:6
THX ADV.SURROUND
STEREO STANDARD
SP
AB
SLEEP
DSD PCM
DTS HD ES 96/24
MSTR
S.RTRV SOUND UP MIX
OVER
MONO
dB
2
MULTI-ZONE
STEREOTrueHD WMA9Pro
FULL BAND
TUNED
PQLS
ALC
ATT
2
2
USBHMG
VIDEO
TV
DVD
HDMI
DVR
BD
CD
TUNER
CD-R
PHONO iPod
SIRIUS
[ 2 ]
XM
[ 3 ]
[ 4 ]
21 3
11
78
9
65
1210 13 14 15 16
22 2318 19 20 21
17
8
4
SC-9540.book 15 ページ ２００９年４月２４日 金曜日 午後１時４２分
