A SERVICE OF

logo

6 ADJUSTING FOCUS
1 First, adjust focus of the NetCam2 by turning the front focus ring of the
lens.
2 If you cannot focus with the lens, loosen the screw in the back focus ring.
3 Setting the lens at the middle range, focus by turning the back focus ring.
4 When you have focused, tighten the screw.
5 Complete the focus by turning the front focus ring of the lens.
50
NetCam2 Section 6
Screw
NetCam2 _ii_00592en.qxd 1/23/03 2:22 PM Page 50