About
This
Manual
National Instruments Corporation xi VXI-MIO Series User Manual
This manual describes the electrical and mechanical aspects of each
module in the VXI-MIO Series product line and contains information
concerning their installation, operation, and programming. Unless
otherwise noted, text applies to all modules in the VXI-MIO Series.
The VXI-MIO Series includes the following modules:
• VXI-MIO-64E-1
• VXI-MIO-64XE-10
The VXI-MIO Series modules are high-performance multifunction
analog, digital, and timing I/O modules for VXIbus.
Organization of This Manual
The
VXI-MIO Series User Manual
is organized as follows:
• Chapter 1,
Introduction
, describes the VXI-MIO Series modules,
lists what you need to get started, describes the optional software
and optional equipment, and explains how to unpack your
VXI-MIO Series module.
• Chapter 2,
Configuration and Installation
, explains how to
configure and install your VXI-MIO Series module.
• Chapter 3,
Hardware Overview
, presents an overview of the
hardware functions on your VXI-MIO Series module.
• Chapter 4,
Signal Connections
, describes how to make input and
output signal connections to your VXI-MIO Series module via the
module I/O connector.
• Chapter 5,
Calibration,
discusses the
calibration procedures for
your VXI-MIO Series module.
• Appendix A,
Specifications
, lists the specifications for each
module in the VXI-MIO Series.
• Appendix B,
Optional Cable Connector Descriptions
, describes the
connectors on the optional cables for the VXI-MIO Series modules.
About
This
Manual
