Audio Setup
SPDIF Out (Digital outputs only)
Default setting:
RRaaww
If you are not using the UNIDISK 2.1’s digital audio
outputs, set to
OOffff
.
If any of the UNIDISK 2.1’s digital outputs are connected
to a Linn System Controller, other external audio
decoder or other device, set to
RRaaww
.
If you are recording to an external digital source (e.g.
DAT player), set to
LLttRRtt PPCCMM
.
LPCM Out (Digital outputs only)
Default setting:
LLPPCCMM 9966KK
If any of the UNIDISK 2.1’s digital outputs are connected
to a Linn System Controller, or any other device which accepts
a sampling rate of 96 kHz, set to
LLPPCCMM 9966KK
.
If the external device does not accept a sampling rate of
96 kHz, set to
LLPPCCMM 4488KK
.
Notes:
Even when set to
LLPPCCMM 9966KK
some discs will only output at the lower rate of 48 kHz.
Audio signals from SACDs and DVD-Audio discs are output as analogue only. There is no
output for these disc types from the digital connectors.
Channel Setup (Analogue outputs only)
Default setting:
55..11 cchhaannnneell
If the UNIDISK 2.1 is being used in a two channel system,
set to
22 cchhaannnneell
. (In such a system 5.1 channel material
on SACDs and DVD-Audios will be downmixed to 2
channels.)
If the UNIDISK 2.1 is connected to a Linn System
Controller, or is being used in any other system that has
more than two channels, set to
55..11 cchhaannnneell
.
Note:
Regardless of the setting Dolby Surround and DTS material is always downmixed to two channels.
Downmix (Analogue outputs only)
Default setting:
PPuurree SStteerreeoo
If you are going to apply Dolby Pro Logic decoding to
the audio signal, set to
LLttRRtt
.
If you are not going to apply Dolby Pro Logic decoding
to the audio signal, set to
PPuurree SStteerreeoo
.
Dual Mono (Analogue and digital outputs)
This option is for DVD-Videos which have separate audio
tracks for the left and right channels.
Default setting:
SStteerreeoo
To hear only the left channel, set to
LL--mmoonnoo
.
To hear only the right channel, set to
RR--mmoonnoo
.
To combine the discrete left and right channels, set to
MMiixx--mmoonnoo
.
For normal use (i.e. most discs), set to
SStteerreeoo
.
Midnight Movie (Analogue and digital outputs)
Default setting:
OOffff
This option allows you to add compression to the Dolby
Digital audio signal on DVD-Videos. Adding
compression reduces sudden increases in volume, such
as the sound of an explosion.
To add compression, set to
OOnn
.
