KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
7.4 Upgrading Firmware
To install the latest Kramer firmware version on a VP-719DS unit, connect
the COM port on your PC to the RS-232 port on the VP-719DS unit, as
section 5.1 describes, and go to the Kramer Web site at this URL:
http://www.kramerelectronics.com for the latest information.
8 Technical Specifications
Table 6 includes the technical specifications:
Table 6: Technical Specifications
1
of the VP-719DS
Inputs:
VIDEO: 2 x composite video 1 Vpp/75 Ω on RCA connectors; 2 x Y/C (s-Video)
1 Vpp (Y), 0.3Vpp (C) / 75 Ω on 4 pin connectors; 1 x Component (Y, Pb/Cb,
Pr/Cr) on RCA connectors; 1x VGA (VGA/SVGA/XGA/UXGA) on an HD15F
connector; and 1x DVI connector
AUDIO: 3 x stereo audio on RCA connectors (for VIDEO 1, VIDEO 2 and
COMPONENT) and 1x PC audio on a 3.5mm mini socket
Outputs:
VIDEO: 1 x VGA/SVGA/XGA/UXGA on an HD15F connector
AUDIO: 1 x stereo audio on RCA connectors
Output Resolutions: VGA (640x480), SVGA (800x600), XGA (1024x768), SXGA (1280x1024), UXGA
(1600x1200), 1024x852, 1024x1024, 1366x768, 1365x1024, 1280x720,
720x483, 852x480, 1400x1050, as well as a user definable output mode
Control: Front panel buttons/ OSD, IR remote control, RS-232 on a DB-9 connector
Additional Controls: Different vertical refresh rates, ProcAmp control, output image scaling and
aspect ratio change
Firmware: Frame freeze, digital zoom 4X, Flesh tone (special color processing), Gamma setting
H Frequency: 15.63~90kHz
V Frequency: 50~100Hz
Computer Resizing: Auto-resizing to panel pixel number
RGB Video Signal:
RGB, 1.0 Vpp, 75 Ω
RGB Sync Signal: Separate H/VTTL, composite sync, analog
Audio Input/Output
Voltage:
0~0.5 Vrms
Plug and Play: DDC1 / DDC2B
De-interlacing: Adaptive and pixel based
Film mode detection:
2:2 / 3:2 pull down reverse
Power Source: 100-240 VAC, 50/60 Hz, 30VA automatic power supply
Dimensions: 19" (W), 9.3" (D) 1U (H) rack mountable
2
Accessories: IR remote control, power cord
3
Weight: 3 kg (6.6 lbs.) approx.
1 Specifications are subject to change without notice
2 When installing a Kramer machine on a closed or multi-unit rack assembly, be aware that the operating ambient temperature
of the rack environment may be greater than room ambient. In particular, take care that there is sufficient air flow. (Refer to
the "Operating Conditions.pdf" file on our Web site at http://www.kramerelectronics.com (click "FAQs" in the Technical
Support section))
3 We recommend that you use only the power cord that is supplied with this machine
