A SERVICE OF

logo

8. To remove a printhead, lift up the blue handle.
9. Using the blue handle, use steady force to disengage the printhead.
10. Pull the blue handle upward until the printhead is released from the carriage.
CAUTION Do not pull abruptly because this can damage the printhead.
11. The front-panel display identifies the missing printhead.
Insert a printhead
1. If the printhead is new, shake the printhead vigorously before removing the protective caps.
88 Chapter 8 Handling ink cartridges and printheads ENWW
Handling ink cartridges
and printheads