Hewlett-Packard Z2100 Manual

A SERVICE OF

next previous

5. Insert the new printhead into its correct slot in the carriage.

CAUTION Insert the printhead slowly and vertically, straight down. It may be damaged if

you insert it too fast, or at an angle, or if you rotate it as you insert it.

6. Push down as indicated by the arrow shown below.

CAUTION When installing the new printhead there may be some resistance, so you need

to press it down firmly but smoothly. You should hear a beep and see confirmation on the

front-panel display that the printhead has been inserted. If you have difficulty, see

Cannot

insert a printhead on page 140.

7. Insert any other printheads, that need to be installed, with the same procedure, then close the

carriage lid.

90 Chapter 8 Handling ink cartridges and printheads ENWW

Handling ink cartridges

and printheads