Problem
Solution
Two or more sheets
There may be too many sheets of paper
feed at the same time.
in the cut sheet feeder’s bin. The bin can
hold a maximum of 150 sheets of paper
(82g/m
2
). Remove some of the excess
sheets. Refer to 5-2.
The stack of paper may not have been
loosened sufficiently. Before loading a
stack of paper, be sure to fan it
sufficiently and align the edges of the
stack. Refer to 5-5.
The paper feed is
crooked.
The paper may be old or creased.
Discard it and load new, clean sheets of
paper.
You may not be using the proper size
paper. Make sure to use paper sizes that
are within the range specified in Chapter
8. Refer to 8-16.
You tried to
The single sheet may have been inserted
manually insert a
in the wrong place. Check the triangle
single sheet, but the
mark and insert the sheet again. Refer to
sheet was not fed.
5-17.
Troubleshooting 7-23
