Epson M00002112 Manual

A SERVICE OF

next previous

Chapter 2 Installation and Setup

27

2

Connecting the TM Printer

BeforeconnectingtheTMprinter,settheHandshakingsettingoftheprintertoʺReceivebuffer

fullʺ.

ConnecttheTMprinter.ForinformationonhowtoconnecttheTMprinterandconfigurethe

DIPSW,seetheUserʹsManualsuppliedwiththeTMprinterortheTechnicalReferenceGuide.

Parallel (LPT) connection

Whentheprinterisconnected,theʺNewHardwareDetected.EPSONTM‐P2.01ʺscreenappears

thentheʺFoundNewHardwareWizardʺscreen.Inthiscase,performthefollowingsteps.

1

Click the [Next] button to search for the driver.

2

The driver is found and installed.

Serial (COM) connection

Whenusingtheserialconnection,makesuretheprintersettingsmatchtheprinterdriverport

settings(BaudRate/DataBits/Parity/StopBits/FlowControl).

Ethernet (10/100 Base-T) connection

WhenusingEthernetconnection,checktheIPaddresssetting.ToconfiguretheIPaddress,use

theEpsonTMNetwingconfigUtility.Fordetails,seetheʺUB‐E02TechnicalReferenceGuide.ʺ

Wireless LAN (IEEE 802.11b) connection

WhenusingwirelessLANconnection,checktheIPaddresssetting.ToconfiguretheIPaddress,

usetheEpsonTMNetwingconfigUtility.Alsocheckthesecuritymeasuresandlocation

sufficiently.Fordetails,seetheʺUB‐R02TechnicalReferenceGuide.ʺ

 The maximum number of printers that can be simultaneously connected to multiple

computers is 8.

 Turn off the power of the TM printer and wait for more than 5 seconds before turning on

the power.