159
R4CB860
html.bk Rev. F
EPWEB.FM A5 size
10/19/04
R
Proof Sign-off:
KOW N.Mizuno H.Tomizawa
T.Takahashi
NOC K. Lee
Security Settings
WEP Settings
Transmission Rate Select the transmission speed from the list.
Items Explanations
Security Level Select the security level from the list.
Note:
If you are using EpsonNet 802.11g Wireless Ext.
Print Server in the Ad Hoc mode, you cannot use
WPA-Personal (TKIP) for the security level.
WEP Authentication
Method
Select an authentication algorithm: Open
System, Shared Key, or Auto.
(This item is not available when WPA-Persona
(TKIP) is selected for the security level.)
Items Explanations
Input using hex Enables or disables the function to set the WEP
Key in hexadecimal.
WEP Key 1 to 4 When you select 64 bit(40 bit) for the length, you
can set up to 4 WEP Keys. When you select 128
bit(104bit), you can set only one WEP Key.
For 64bit and ASCII, enter 5 characters.
For 64bit and Hex, enter 10 digit values.
For 128bit and ASCII, enter 13 characters.
For 128bit and Hex, enter 26 digit values.
Note:
The WEP Key disappears after the network
interface is configured. Therefore, do not forget
the WEP Key you have set.
Active WEP Key Select one WEP Key as an active key before
enabling use of encryption.
