![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/3/24/324a6b62-cf54-4ea8-ae99-f79de8081dd9/324a6b62-cf54-4ea8-ae99-f79de8081dd9-bg58.png)
SelecType Options
Print two different test patterns to check whether your printer is
working correctly. After TEST PRINT appears, press once to
see the following display.
Press to print Pattern 1 (vertical lines) or press to
display Pattern 2 (horizontal lines); then press to print
Pattern
2.
The channel configuration option allows you to choose settings for
the MODE (operating mode), I/F (interface configuration), and
RX-BUFFER (
size
of receive buffer) for each channel. You select
the channel you are going to use. After CH CONFIG appears,
press to see the following display:
* P or S
Press to select Channel I’. If you share the printer and want
to select Channel S, press to display option S; then press
to select channel S. Once you select a channel, you enter the
submenus of CH CONFIG option:
MODE
i/F
RX-BUFFER
SelecType
3-25