A SERVICE OF

logo

SelecType Options
Interface submenu options
The interface submenu is used to set options for the serial interface.
If you are using a serial interface, the options listed below should be
set
so that they match
the requirements of your computer.
BAUD RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
Options for each menu function are described below. An asterisk (*)
is shown to
the
right of the factory default setting.
BAUD RATE = 9600*
19200
9600"
4800
2400
1200
600
300
This option sets the rate data is transferred from the computer to the
printer. The computer and printer must be set to the same baud rate.
PROT = RDY/BSY(H)*
RDY/BSY(H)*
RDY/BSY(L)
XON/XOFF
This option sets printer’s communication protocol. A communi-
cation protocol keeps the computer from sending more information
than the printer can handle. Most computers require RDY/BSY set
to high. The RDY/BSY option is also referred to as DTR POLARITY.
Using the Printer
3-25