Error Messages
Note: If
the
printer was recently transported, the paper feed
mechanism may need to be aligned. See
the
section on setting the
paper feed mechanism in Chapter 1 for details.
PAPER SIZE ERROR
If you press
the ON LINE
button to override the
PS CHANGE
message, this message
appears as your print job ejects to remind
you to change the paper and SelecType
PAPER
SIZE option. See
PS CHANGE
below.
PS CHANGE
Your application software has requested a paper size that does not
match your SelecType
setting
or paper. Press the
CONTINUE/RESET
button to clear the error; the printer is set off line.
Note: If you are using a non-standard paper size (one that is not
listed on the
PAPER
SIZE menu in the SelecType), manual
feeding may be
necessary.
See Chapter 4 for details.
After clearing the error, you have two options:
1.
Change the paper in the cassette; then enter SelecType and
change the paper
size to match.
Press the
ON LINE
button after
exiting SelecType to continue printing.
2.
Alternatively, press the
ON LINE
button to continue printing on
the current paper. (The message
PAPER SIZE ERROR
appears
in the display.) See PAPER SIZE ERROR above.
Troubleshooting 7-5
