4
© 2000 Directed Electronics, Inc. N530T 1/00
______
______
______
______
______
______
______
______
H1/1 VIOLET Driver-Side Ground Path Input: This wire provides the ground path for the driver-side motor.
Connect this wire to a paint-free surface on the vehicle chassis. Use a factory bolt if possible.
H1/2 GREEN Driver-Side Down Motor Output: Cut the driver-side down wire at the switch (see NOTE on page 1)
and connect this wire to the motor side of the down wire.
BLUE/BLACK PASSENGER-SIDE UP MOTOR OUTPUT
GREEN/BLACK PASSENGER-SIDE DOWN MOTOR OUTPUT
VIOLET/BLACK PASSENGER-SIDE GROUND PATH INPUT
BLACK (-) CHASSIS GROUND
RED (+)12V CONSTANT, 20A FUSED
BLUE DRIVER-SIDE UP MOTOR OUTPUT
GREEN DRIVER-SIDE DOWN MOTOR OUTPUT
VIOLET DRIVER-SIDE GROUND PATH INPUT
H1/1
H1/2
H1/3
H1/4
H1/5
H1/6
H1/7
H1/8
Heavy Gauge Harness (H1) Wire Connection Guide
Systems With Factory Control Modules
