Managing Smart Ports
Configuring Smart ports for Guests
ESW 500 Series Switches Administration Guide 88
Smartports Guest Settings Page
The
Smartports Guest Settings Page
contains the following fields:
• Ports — Indicates the port to which Smart ports Wizard settings are applied.
• VLAN Port Mode — Indicates the VLAN port mode enabled on the port. The
value is:
-
Access
— Indicates the value is Access.
• Trunk Native VLAN ID — Defines the VLAN receiving untagged packets at
ingress. The default value is VLAN 1. The user can change it to any other
created VLAN through a drop down list.
• Broadcast Storm Control — Indicates the percentage of Broadcast Storm
Control enabled on the port. The value is 10% of the port speed.
• Spanning Tree Port Fast — Indicates Fast Link is enabled on the port. If Fast
Link mode is enabled for a port, the Port State is automatically placed in the
Forwarding state when the port link is up. Fast Link optimizes the STP protocol
convergence. STP convergence can take 30-60 seconds in large networks.
• Spanning Tree BPDU Guard — Indicates if BPDU Guard is enabled on the
interface.
• QoS Policy — Indicates that the default QoS policy settings are applied to the
port. The name of the default QoS policy is router-map.
• Macro Description— Indicates the type of device connected to the port. For
guests, this field is always
Guest.
STEP 6 Select a VLAN in the
VLAN ID
dropdown box.
STEP 7 Click Apply. The guest port settings are saved, and the device is updated.
STEP 8 Click OK. The
Smart ports Setting
page opens.
