Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 334
Add QoS Policy Profile Page
The
Add QoS Policy Profile Page
contains the following fields.
• New Policy Name — Specifies the user-defined policy name.
• Class Map — Selects the user-defined class maps which can be associated
with the policy.
• Action — Defines the action attached to the rule. The possible field value is:
• Trust CoS-DSCP — Determines the queue to which the packet is assigned
dependent on the CoS tag and DSCP tag.
• Set
—
Defines the Trust configuration manually. The possible field values
are:
-
DSCP
— In the New Value box, the possible values are 0-63.
- Queue — In the New Value box, the possible values are 1-4.
-
CoS
— In the New Value box, the possible values are 0-7.
• Police — Enables Policer functionality.
• Type — Policer type for the policy. Possible values are:
-
Aggregate
— Configures the class to use a configured aggregate
policer selected from the drop-down list. An aggregate policer is
defined if the policer is shared with multiple classes. Traffic from two
