SIP Release Notes 164 Document #: LTRT-26901
CPE SIP Products
3.8 Infrastructure Constraints
This release includes the following known infrastructure constraints:
1. When configuring the Syslog parameters through the WAN interface (i.e., Syslog
server IP address and enable/disable Syslog messages), error, notice, or debug
messages may appear in the log (e.g., syslog/rs232). These messages should be
ignored.
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
2. When using BITS with line-synch mode, only APS protected mode is supported.
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
3. The following parameters do not return to their default values when attempting to
restore them to defaults using the Web interface or SNMP, or when loading a new ini
file using BootP/TFTP:
• VLANMode
• VLANNativeVLANID
• RoutingTableDestinationsColumn
• RoutingTableDestinationPrefixLensColumn
• RoutingTableInterfacesColumn
• RoutingTableGatewaysColumn
• RoutingTableHopsCountColumn
• RoutingTableDestinationMasksColumn
• EnableDHCPLeaseRenewal
• RoutingTableDestinationMasksColumn
• IPSecMode
• CASProtocolEnable
• EnableSecureStartup
• UseRProductName
• LogoWidth
