Chapter 5
Software
98
The following table describes the parameters in this screen.
Settings in boldface are the default and suggested parameter
settings.
Setting a Password
Follow these steps:
1. Use the cursor up/down keys to highlight a Password
parameter (Setup, Power-on or Hard Disk) and press the
Enter key. The password box appears:
2. Type a password. The password may consist of up to
seven characters (A-Z, a-z, 0-9).
Parameter Description Options
Setu
Password
When set, this password protects the
computer and this BIOS Utility from
unauthorized entry. See the following
section for instructions on how to set a
password.
Disabled or
Enabled
Power-on
Password
When set, this password protects the
computer from unauthorized entry. See
the following section for instructions on
how to set a password.
When Password Check on Boot and/or
Password Check During Resume is
enabled, you need to enter this password
to continue operation.
Disabled or
Enabled
Hard Disk
Password
When set, this password protects the
hard disk from unauthorized access. See
the following section for instructions on
how to set a password.
Disabled or
Enabled
Disk Drive
Control
When Floppy Drive Lockout is enabled,
the floppy drive connection is stopped
and disabled.
Disabled or
Enabled
330.book Page 98 Friday, March 5, 1999 11:08 AM
