Chapter 5
Software
90
BIOS Utility
The BIOS Utility is a hardware configuration program built into
your computer’s BIOS (Basic Input/Ouput System).
Your computer is already properly configured and optimized,
and you do not need to run this utility. However, if you
encounter configuration problems, you may need to run this
program. Please also refer to “Troubleshooting” on page 103
when a problem arises.
Using the BIOS Utility
To start the BIOS Utility, follow these steps:
1. Save your work and restart the computer.
A BIOS Utility entry reminder appears near the bottom of
the screen.
2. Press F2 to enter the BIOS Utility. The BIOS Utility main
screen appears.
There are seven menu options. Use the cursor up/down keys to
select a menu item, then press Enter. After you enter a sub-
menu, you can:
330.book Page 90 Friday, March 5, 1999 11:08 AM
