Filter
Top Products
PREPARATION PROCEDURE
8
Follow the procedure below to connect this unit to a PC, and then connect the AC adapter.
1 Connect the USB port of this unit to that of
the PC using a USB cable.
y
In addition to the PC connection through a USB cable, this
unit can be connected to a PC or TV conference system
through audio connection cables. For details, see
“Connecting audio connection cables” (page 12).
2 Connect the AC adapter to the DC IN 12V
terminal.
3 Connect the power cable to the AC adapter.
4 Connect the power cable to the AC outlet.
This unit is turned on and the microphone indicators
light up in sequence.
y
Pressing and holding MIC MUTE for 3 seconds sets this unit to
the standby mode. When this unit is in the standby mode, it can be
turned on again by pressing any key.
Step 1: Connecting this unit
3
4
1
2
To AC wall outlet
To USB port
01EN_00_PJP-100UH_UCGB.book Page 8 Wednesday, August 23, 2006 1:49 PM