Filter
Top Products
17 En
English Français Deutsch Svenska Italiano Español Nederlands Русский
To listen to an FM station, connect the antenna as described in “Connecting the speakers and antenna” (P. 2).
Display information (remote control only)
If you press DISPLAY on the remote control, the information shown on the front panel display will be switched in the
following order.
Displaying Radio Data System information (U.K model only)
If you press DISPLAY on the remote control while Radio Data System information is being received, the information shown
on the front panel display will be switched in the following order.
If the signal transmission of the Radio Data System station is too weak, this unit may not be able to receive Radio Data System information
completely. In particular, RT (Radio Text) information uses a lot of bandwidth, so it may be less available compared to other types of
information.
LISTENING TO FM STATIONS
Selecting an FM station
1 Press the RADIO source button to switch the
audio source to FM.
2 Tun e FM statio ns
Automatic tuning: Press and hold TUNING / .
Manual tuning: Press TUNING / repeatedly.
If you tune to a station manually while receiving FM, the sound
will be monaural.
1
2
Preset number and frequency Reception status*
* Example of reception status indication.
TUNED/STEREO: A strong FM stereo broadcast is being received.
TUNED/MONO: A monaural FM broadcast is being received (even if the FM
broadcast is stereo, reception will be monaural if the signal is weak).
Not TUNED: No broadcast is being received.
PS (Program Service)
PTY (Program Type)
RT (Radio Text)
CT (Clock Time)
Reception status
Preset number and frequency