To Set: Action: Display: Action: To Finish: Notes
Using as Sound Source
(Soundscapes)
Turn On
Press
SOUND
The code for
the sound you
previously
programmed
appears in the
display. [See
Key#2, page
10 or 13.].)
Press
or
to scroll
through
sounds.
(See Key
#2, page 10
or 13.)
Press OFF/
SET. Your
setting will
be stored.
The unit will play
the sound source
at the volume you
programmed in the
"Waking" section of
the Programming
instructions (above.)
To Set the
Volume
Press
SOUND,
then press
and hold
.
L15 appears
(or the level
that you have
programmed
previously).
Use
or
to set
desired
volume level
-- between
L1 and L30.
Press SET/
OFF. Your
setting will
be stored.
Turn Off
Press OFF/
SET
Using as Sound Source (Radio)
Turn On
Press
SOUND
rd or the last
programmed
soundscape
appears on
display
If required,
press
or
to scroll
until rd
appears in
the display.
To Change
the Station
With radio
on, press
SOUND
Use
or
to find
desired
station.
To Set the
Volume
With radio
on, press
.
L15 appears
(or the level
that you have
programmed
previously).
Use
or
to set
desired
volume level
-- between
L1 and L30.
Turn Off
Press OFF/
SET
Other Functions/Features
13
Key #1:
15 light comes on faintly and increases in brightness for 15 minutes prior to alarm sounding
30 light comes on faintly and increases in brightness for 30 minutes prior to alarm sounding
C1 Calming Colors Illumination comes on when alarm sounds
OFF wake-up light function is deactivated
Key #2:
A1 chime
rd radio (FM)*
N1 birds
N2 ocean
N3 stream
N4 ocean with music
N5 stream with music
OFF sound is deactivated**
*To find and set your favorite FM station:
If you have selected rd (FM radio) for your sound, set the station by
pressing WAKE once again. The radio frequency (“MHz”) and “rd”
appear on the display. Press ▲ or ▼ to select your favorite radio
station. Start an automatic station search by holding ▲ or ▼ for a
few seconds and then releasing. The search stops when a strong
signal reception has been found. Press ▲ or ▼ until you have found
your desired station.
**If you set the wake-up light duration to OFF, this setting cannot be
set to OFF also.