Filter
Top Products
16
60 RECEIVE CHANNELS
The uh078sx also has 60 receive only channels (CH41 to CH100) which can
be programmed with frequencies ranging from 450-512MHz (in 12.5kHz
steps).
If you know the frequency you may store it manually.
MANUAL PROGRAMMING
Turn power off. Press and hold while turning
power back on. The channel indicator flashes the
lowest available empty channel. You may use the
or to select another channel.
Press . The frequency indicator flashes the
MHz whole number value to be set.
Press or to select the MHz whole
number value (between 450 and 512 MHz).
Press or to move left or right between the
MHz whole number and the MHz decimal value
(in 12.5kHz steps) and press or to
change values.
When finished press , the channel indictor
flashes.
Press or to select the next channel for programming or press and
hold to store setting.
A confirmation tone sounds. The channel is automatically entered into the OS
scan memory.
DELETING A PROGRAMMED RECEIVE CHANNEL
Follow the steps in Manual Programming to enter a frequency for a desired
channel.
Select 0 for the first frequency digit and then press .
Press or to select another channel or press and hold to
exit programming mode.