Filter
Top Products
9
ROGER BEEP
Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT
and VOX transmission). Roger Beep can be heard through the speaker when
Key Beep is on. Roger Beep is transmitted even if key beep is turned off.
However Roger Beep will not be heard from the speaker.
1. Press six times. and current setting flashes.
2. Press or to change setting ON/OFF.
3. Press and hold to store setting.
SELECTING CHANNEL
Press or to select the desired channel.
If you press and hold the or ,
channel number will scroll rapidly.
TRANSMITTING A CALL TONE
Your uh078sx is equipped with 5 selectable call tones that will be
transmitted when is pressed.
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted
within one minute then an error tone will sound.
1. Press three times. The current setting flashes.
2. Press or to change setting
between C1, C2, C3, C4 and C5.
3. Press and hold to store setting.