Uniden uh078sx Portable Radio User Manual


 
14
Group Scan (GS) Mode
Allows you to monitor a Priority Channel while scanning.
To use GS Mode Scanning, press and hold the key.
GS appears on the
display.
GS Scanning checks the Priority channel activity regularly.
If SCAN is deactivated while in an active channel, the uh078sx will
stay on that active channel. If no other channels are active, the
uh078sx will reinstate the starting channel.
If SCAN is deactivated while it is turned to an active channel, the
uh078sx will stay on that active channel. If none of the channels are
active, the uh078sx will reinstate the scan start channel.
If GS Scanning is initiated when there are no channels
programmed in GS memory, an error tone will be heard and
scanning will not start.
If the Priority channel becomes active the radio will stay on that channel for as
long as the signal is present. If the received signal ceases, Priority scanning
continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel the
uh078sx will continue monitoring the Priority Channel for activity
while listening to the active one.
To deactivate SCAN, press or .
PTT