Filter
Top Products
MM-014716-001
57
9.2 MESSAGES
During radio operation, various messages are displayed on either line 1 or line 2. Typical messages
include control channel status information, such as system busy or call denied, or messages associated
with the radio's operation, (i.e. volume adjust). These messages are described as follows:
Table 9-2: Display Messages
MESSAGE NAME DESCRIPTION
QUEUED Call Queued Indicates the system has placed the call in a request queue.
SYS BUSY System Busy
Indicates the system is busy, no channels are currently available, the queue is full or
an individual call is being attempted to a radio that is currently transmitting.
DENIED Call Denied Indicates the radio is not authorized to operate on the selected system.
CC SCAN Control Channel Scan
Indicates the control channel is lost and the radio has entered the Control Channel
Scan mode to search for the control channel.
WA SCAN Wide Area Scan
Indicates the control channel is lost and the radio has entered the Wide Area Scan
mode to search for a new system (if enabled through programming).
*RXEMER* Receive Emergency Indicates an emergency call is being received. This message will be flashing on line 2.
*TXEMER* Transmit Emergency
Indicates an emergency call has been transmitted. This message will be flashing on
line 2.
VOL=31 Volume Level
Indicates the current volume level. The volume level display ranges from OFF (silent)
to 31 (loudest).
UNKNOWN
Caller's ID Not
Received
Indicates that an individual call is being received, but the caller's ID was not received.
TX DATA Transmit Data Indicates the radio is transmitting a data call.
RX DATA Receive Data Indicates the radio is receiving a data call. Displayed on line 2.
DATA OFF Data OFF Indicates the radio is in the data disabled state. Displayed on line 1.
DATA ON Data ON
Indicates the radio has been toggled to the data enable state. Displayed for two
seconds on line 1 when toggled to enable state.
SYSC ON
System Scan
Features ON
Indicates the System Scan features are enabled.
SYSC OFF
System Scan
Features OFF
Indicates the System Scan features are disabled.
PA ON Public Address ON Indicates that the public address function of the radio is enabled.
PA OFF Public Address OFF
Momentary (2 seconds) - indicates that public address function of the radio was
disabled.
ALRM ON
External Alarm
Enabled
Indicates that the external alarm function of the radio is enabled.
ALRM OFF
External Alarm
Disabled
Momentary (2 seconds) - indicates that the external alarm function of the radio was
disabled.
PVT DIS
Private Mode
Disabled
Indicates that private mode is disabled or no encryption key has been programmed for
the selected group/channel or special call.
FRCD PVT
Forced Private
Operation
Indicates that forced private operation has been pre-programmed into radio.
NO KEY #
Encryption Key
Missing
Flashing - indicates that no encryption key or an incorrect encryption key is
programmed into the radio.
BCKL=1-6 Backlight Indicates the display intensity and keypad backlight level.
GR Group ID Indicates that the call is a group call and is followed by the GID of the caller.
ID Individual ID
Indicates the call is an individual call and the ID number of the caller, example "ID
2725."