Filter
Top Products
user manual
TCS Compact series
tcs compact manual
page 20
Turbosound LMS series loudspeaker management systems
The Turbosound LMS-D24 and LMS-D26 series are powerful DSP-based audio processing
units designed for use with Turbosound loudspeaker systems and associated bass
enclosures. The functions of multiple conventional products are combined in a compact
1U high 19” rack unit. They offer EQ, both for the room and the drivers, delay to align the
wave front, and limiters that can be set for each individual component to ensure against
damage and to protect the long term reliability of your speakers.
The LMS-D26 has two inputs and six outputs and the LMS-D24 has four outputs. The
units are configured to provide specific equalisation and crossover points aimed at
optimizing the performance of these Turbosound loudspeaker systems. In addition,
limiters, delays, eq, gain, polarity, and crossover filter controls are accessible to the user
in order to match specific operation environments. The LMS series crossovers are
designed for quick setup and adjustment via easy-to use front panel controls and, are
ideally suited to both live sound and fixed installation.
Features
• Minimal signal path design, providing exceptional audio quality with carefully
optimised processing and high performance converters for a >111dB dynamic
range.
• Sonically superb ADC / DAC combination; a carefully matched pairing of the best
devices from Burr Brown and Wolfson. Analogue Devices SHARC chip for DSP
• Extended bandwidth; 96 kHz sampling frequency provides for a nominally flat
response to 40 kHz with minimal filtering.
• Audio-grade capacitors used in the analogue signal path for true audiophile
performance and superior accuracy.
• Input delays of up to 400ms and output delays of up to 80ms can be set up on
each output (mono) or pair of outputs (stereo) with fine resolution of 21µs steps
to ensure perfect driver alignment.
• LF shelving filters to allow adjustment of the response in order to match
variations of the acoustic conditions.
• Switching power supply that automatically adjusts to mains input voltages from
85 volts to 240 volts, allowing it be used anywhere in the world without
inconvenient mains transformer adjustment.