Transcend Information TS4GMP630 MP3 Player User Manual


 
16
Record using the Built-In Microphone
1. Unless otherwise selected, Pressing and Holding the “A-B/REC” button for more than 2
seconds in any mode except the RADIO Mode will begin an audio recording using the MP630’s
Built-in Microphone.
2. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/MICIN.DIR/] folder.
3. Files Recorded using the Built-in Microphone are named in the order [Month/DayM001.WAV], then
[Month/DayM002.WAV] and so forth.
4. Pressing the “PLAY/PAUSE/PWR ON-OFF” button
during a recording will Pause the
recording, pressing the “PLAY/PAUSE/PWR ON-OFF” button
again will resume the
recording.
5. Press the “A-B/REC” button
for more than 2 seconds during a recording to stop the recording
and the screen will return to the RECORD Mode.
6. Recorded audio files can be accessed in the RECORD Mode, or by using the File Navigator.
Sample rate Channels 1GB 2GB 4GB
RECORD Functions
Low (8KHz) 1 (mono) 64 hrs 128 hrs 256 hrs
Avg (16KHz) 1 (mono) 32 hrs 64 hrs 128 hrs
Med (22KHz) 1 (mono) 24 hrs 48 hrs 96 hrs
Good (32KHz) 1 (mono) 16 hrs 32 hrs 64 hrs
Record
Sound
High (44KHz) 1 (mono) 12 hrs 24 hrs 48 hrs
If not enough memory space is available, or the battery power is too low, the MP630 cannot support
the maximum recording capacity as outlined in the above table.
The closer you move the MP630’s Microphone to the source of the sound the higher the quality of the
recording.
Record using the External Microphone
1. In the REC INPUT DEVICE Mode select Ext MIC (External Microphone) as the recording device.
2. Plug an External Microphone into the MP630’s Line-In port.
3. Press and Hold the “A-B/REC” button
for more than 2 seconds to begin an audio recording
using the External Microphone.
4. A Recording file is generated and will appear on the screen; this file is saved in the RECORD Mode in
the [/MICIN.DIR/] folder.