Filter
Top Products
7
Basic Operation
Before using the T.sonic
™
630 for the first time you need to charge the internal battery for
at least 12 hours by plugging it into a computer using the Mini USB to USB A-Type cable.
Charging the Battery
Plug the small end of the Mini USB to USB A-Type cable into the Mini USB connector on the T.sonic
™
630
and plug the large end of the cable into an available USB port on your desktop, or notebook computer.
The T.sonic
™
630’s internal Li-ion battery will begin charging.
Figure 3. Connecting to a Computer
Power ON
Press and Hold the “PLAY/PAUSE/PWR ON-OFF” button to Power ON the T.sonic
™
630. An
animated logo will appear on the OLED Display. After the startup screen disappears the player will revert
to the default MUSIC Mode screen, you can now begin to use the T.sonic
™
630.
It takes a few seconds to Power ON the unit.
When powering on the unit, if the LOCK icon
appears on the OLED Display, this means that the
T.sonic
™
630’s “LOCK” switch is on. You must switch off the “LOCK” before you can
Power ON the T.sonic
™
630.
Player Controls