Filter
Top Products
57
Connections
Connecting to Audio Equipment
You can enjoy high quality dynamic sounds by connecting the player to audio
equipment.
CAUTION
• When you are connecting (via the BITSTREAM/PCM
(DIGITAL) AUDIO OUT jack) an AV decoder that does
not have Dolby Digital, Digital Theater Systems (DTS) or
MPEG2 decoding function, be sure to set “Digital Out” to
“PCM” from the on-screen displays
46 50
. Otherwise,
high volume sound may damage your hearing as well as
the speakers.
• When playing DTS-encoded discs (audio CDs),
excessive noise may be output from the analog audio
output jacks. To avoid possible damage to the audio
system, you should take proper precautions when the
analog audio output jacks of the player are connected to
an amplification system. To enjoy DTS Digital Surround
®
playback, an external 5.1 channel DTS Digital
Surround
®
decoder system must be connected to the
BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the
player.
Notes
• DO NOT connect the BITSTREAM/PCM (DIGITAL)
AUDIO OUT jack of the player to the AC-3 RF input of a
Dolby Digital Receiver. This input on your A/V Receiver is
reserved for Laserdisc use only and is incompatible with
the BITSTREAM/PCM (DIGITAL) AUDIO OUT jack of the
player.
• Connect the BITSTREAM/PCM (DIGITAL) AUDIO OUT
jack of the player to the “DIGITAL (OPTICAL)” input of a
Receiver or Processor.
• Refer to the owner’s manual of the connected equipment
as well.
• When you connect the player to other equipment, be sure
to turn off the power and unplug all of the equipment from
the wall outlet before making any connections.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged
by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the
player’s power cord. If you leave the amplifier power on,
the speakers may be damaged.
• For connection to your TV, see “Connecting to a TV”
54
.
• For details of output sound, see
40
.
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow