Filter
Top Products
72
Others
Before calling service personnel (continued)
Symptom Cause Correction
The player does not start
playback.
• No disc is inserted.• Insert a disc.
• An unplayable disc is inserted.• Insert a playable disc. (Check the disc type, colour system and region
number.)
• The disc is inserted upside down.• Insert the disc with the playback side down.
• The disc is not inserted securely.• Insert the disc securely in the disc holder.
• The disc is dirty.• Clean the disc.
• The parental lock function i
s set.• Cancel the parental lock function or change the parental lock level.
• The player is set to the external input
mode (AV-IN).
• To play a disc with the player, Normal needs to be set. Press MODE
repeatedly so that you can view playback picture.
Playback does not follow
the course of the disc’s
program.
• It is in the repeat playback mode,
memory playback, etc.
• These operations may prevent a proper progression of the contents.
Buttons do not work.• Power supply fl uctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• Turn the power on or off with the POWER switch. Or disconnect the
power cord and insert it into the wall outlet again.
The remote control does
not work properly.
• The remote control is not pointed at
the remote sensor of the player.
• Point the remote control at the remote sensor of the player.
• The remote control is too far from the
player.
• Operate the remote control within about 3 m (9.9 feet).
• The batteries in the remote control are
exhausted.
• Replace the batteries with new ones.
• The player’s remote sensor is exposed
to a strong light source such as direct
sunlight or other illumination.
• Avoid the player from being exposed to a strong light source.
SD-P1900SR_P53-76.indd 72 07.3.8 8:33:39 PM