Filter
Top Products
64
Connections
Connecting to audio equipment
You can enjoy high quality dynamic sounds by
connecting the player to audio equipment.
The connecting method depends on the types of audio
input, digital or audio.
Select the method according to the type of your
equipment.
Caution
• When you connect the player to other equipment, be sure to
turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• Turn off the amplifi er before you connect or disconnect the
player’s power cord. If you leave the amplifi er power on, the
speakers may be damaged.
• The output sound of the player has a wide dynamic range.
Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by
a sudden high volume sound.
Notes
• Refer to the owner’s manual of the connected equipment as
well.
• If you place the player near a tuner or radio, the radio
broadcast sound might be distorted. In this case, place the
player away from the tuner and radio.
To BITSTREAM/PCM
Signal flow
AV amplifier
The following audio systems are
compatible:
Dolby Digital
DTS
MPEG2 audio
2 channel digital stereo
To digital audio input (coaxial)
Coaxial digital
cable
(not supplied)
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories. Confi dential
Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.
“DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
Connecting to an AV amplifi er (via
digital audio input)
Make the
following
setting.
Setting Select: Page
“Digital Out”
“Bitstream”
or
“PCM”
58
SD-P1900SR_P53-76.indd 64 07.3.8 8:33:37 PM