Filter
Top Products
33
Using the Product
Other Helpful Information
Welcome
Getting Ready
Turning the Power ON/OFF
● Preparation
●
Set the BATTERY switch to ON. (
p. 30)
Turning the Power ON/OFF
Press and hold the POWER button.
Holding down the button of the wired remote control (supplied with the
MEGF60, MEGF40) for 2 seconds or longer will also turn the power on or off.
The power cannot be turned on or off during the HOLD condition. Switch off
HOLD and then press the POWER button.
When the gigabeat is used for the first time or when turning on the power for
the first time after resetting (
p.68) or after the battery became exhausted
and was subsequently charged, a TIMEZONE Setup window will be displayed.
Set the TIMEZONE (
p.64) and DATE/TIME (
p.65).
When not playing music and not in use of the screen and power will turn off
automatically. While connected to the AC adapter, the screen will darken, but
it will not go off.
See “BACKLIGHT OFF TIME” (
p. 62).
See “AUTO POWER OFF” (
p. 62).
When the screen is off, the press of a button on the side of the gigabeat will
light the screen and the gigabeat will receive the input of that button.
When the screen is off, operation of the Plus Touch will light the screen, but
that input will not be received by the gigabeat.
gigabeat F60_OP33_39(E)â¸î 05.4.19, 3:44 PM33