Filter
Top Products
33
Setting up your computer and getting started
5.375 x 8.375 ver 3.1
6 Using a small Phillips crewdriver, unscrew the screw that
secures the memory module slot cover.
(Sample Illustration) Unscrewing the memory module slot cover
7 Remove the memory module slot cover.
8 Place the screw and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
Avoid touching the connector on the memory module or on the
computer. Grease or dust on the connector may cause memory
access problems.
9 Carefully remove the new memory module from its
antistatic packaging, without touching its connector.
10 Locate an empty memory slot.
If no memory slot is available, you must remove a module by
performing steps 2-3 of “Removing a memory module” on page 36.
Front of computer